Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
- 4. Cooling system
   4.2. Technical characteristics
   4.3. Hoses of system of cooling
   4.4. Radiator
   4.5. Thermostat
   4.6. Cooling fan
   + 4.7. Switches and sensors of system of cooling
   4.8. Water pump
   4.9. The heat exchanger масло-/cooling liquid
   4.10. Diagnostics of malfunctions in a contour of circulation of oil
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c



4.6. Cooling fan

ELECTRIC FAN

Check

PERFORMANCE ORDER
Check tension giving on the fan. Check the switch and a safety lock. If tension arrives, but the fan does not work, replace it.

Removal

PERFORMANCE ORDER
1. Remove a radiator.
2. Turn off fixing bolts (shooters) and remove a fan casing.
3. Disconnect the socket of connection and turn off fixing nuts (arrows).
4. Unbend a uvula and turn off a fixing nut.
5. Remove the fan engine.

Installation

Installation is carried out upside-down removals.

THE COOLING FAN WITH THE BELT DRIVE (5-CYLINDER ENGINES)

Check

PERFORMANCE ORDER
Examine the fan coupling on existence of traces of leak or damages. Replace the fan if it is necessary.

Removal

PERFORMANCE ORDER
1. Remove a cross-piece of fastening of a radiator.
2. Turn off the coupling of the fan and remove the fan.

Installation

Installation is carried out upside-down removals.