Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
- 4. Cooling system
   4.2. Technical characteristics
   4.3. Hoses of system of cooling
   4.4. Radiator
   4.5. Thermostat
   4.6. Cooling fan
   + 4.7. Switches and sensors of system of cooling
   4.8. Water pump
   4.9. The heat exchanger масло-/cooling liquid
   4.10. Diagnostics of malfunctions in a contour of circulation of oil
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


4.4. Radiator


1. Negative wire of the storage battery.
2. Remove a cross-piece of fastening of the lock of a cowl or remove consolidation from a first line of a cross-piece.
3. Turn off the fixing screw and remove a fixing arm from a headlight.
4. Disconnect wires from the cooling and switch fan: I will corrode connections (1) and a wire of "weight" (2).
5. Weaken fixing collars and disconnect water hoses from a radiator.
6. Disconnect tubes of cooling liquid of an automatic transmission.
7. Remove the conditioner condenser from a radiator.
8. Turn off fixing screws and remove plastic casings on each side a radiator.
9. Turn off fixing screws and remove an airintaking branch pipe.
10. Turn off fixing bolts (are specified by shooters) and remove a radiator of system of the hydraulic booster of a steering.
11. Turn off the bottom fixing nuts and remove washers.
12. Turn off the top bolts of fastening of a radiator.
13. Remove a radiator.
14. Clear and wash out a radiator. Eliminate the found leaks.


Installation is carried out upside-down removals.