Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, steering
   11.2. Technical characteristics
   11.3. General description of adjustment of wheels
   + 11.4. Forward suspension bracket
   + 11.5. Back suspension bracket
   + 11.6. Steering
   - 11.7. Semi-axes
      11.7.2. Technical characteristics
      11.7.3. Removal and installation of semi-axes
      11.7.4. Semi-axis boots
      11.7.5. Semi-axis repair
   11.8. Easily and easy
   11.9. Maintenance of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c
Когда переходить на летнюю резину

11.7.4. Semi-axis boots

Replacement

PERFORMANCE ORDER
1. Remove a semi-axis from the car.

EXTERNAL HINGE

PERFORMANCE ORDER
1. Remove a fixing collar, unbend a boot and remove hinge greasing.
2. Remove the external hinge from a semi-axis.
3. Remove a lock ring, a washer and the plug.
4. Clear the hinge and carefully examine it. Replace the hinge or a semi-axis if it is necessary.
5. Wind shlitsa with a sticky tape and establish a new boot.
6. Establish a washer the curved party inside and establish into place the plug.

7. Establish a new lock ring.

8. Carefully fill the hinge with greasing and establish it on a semi-axis.
9. Fill it on a lock ring.

10. Establish boot edge in a flute and raise boot edge to let the air out.

11. Establish fixing collars and tighten them.
12. Do not tear a boot.

THE INTERNAL HINGE (MODELS WITH THE PETROL ENGINE AND THE MECHANICAL TRANSMISSION)

Semi-axis elements (models with the petrol engine and a mechanical transmission)

1. Stopronoye ring

2. Laying

3. Internal CV JOINT

4. Boot

5. Semi-axis

6. Fixing collar

7. Boot

8. Collar

9. Washer

10. Plug

11. Lock ring

12. External hinge


PERFORMANCE ORDER
1. Bring down an adjusting plate from the hinge.
2. Remove a lock ring.
3. Remove the hinge.
4. Remove a fixing collar of a boot and remove a boot.
5. Clear and examine the hinge. Replace it if it is necessary.
6. Installation is carried out upside-down removals.

THE INTERNAL HINGE (MODELS WITH THE DIESEL ENGINE AND MODELS WITH THE PETROL ENGINE AND THE AUTOMATIC TRANSMISSION)

PERFORMANCE ORDER
1. Remove the external hinge.
2. Remove an internal boot.
3. Clear and examine the hinge. If it is worn-out or damaged, replace a semi-axis.
4. Carefully fill the hinge with greasing.
5. Wind shlitsa with a sticky tape and establish a boot into place.
6. Establish boot edge for a semi-axis ledge.
7. Raise boot edge to let the air out.

8. Ustanovitekrepezhnye collars also tighten them.
9. Establish the external hinge into place.