Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
- 5. Heating and ventilation
   5.1.2. Elements of system of heating and ventilation
   + 5.2. Air central air
   5.3. Antifreeze for a radiator
   5.4. A temperature regulator cooling liquids (thermostat)
   5.5. Check of system of cooling
   5.6. Hydraulic coupling of the fan
   5.7. Pump of system of liquid cooling
   5.8. Radiator
   5.9. Fan casing
   5.10. Diagnostics of malfunctions of system of cooling
   5.11. Diagnostics of malfunctions of system of indication of level of cooling liquid
   5.12. Engine overheat
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


ff85f19c

5.1.2. Elements of system of heating and ventilation

CONTROL PANEL

Removal

PERFORMANCE ORDER
1. Remove the central console.
2. Turn off fixing screws (are specified by shooters) and remove the panel.
3. Remove the panel and disconnect connection sockets.
4. Disconnect ropes of management or turn off fixing screws and remove management ropes. Remove the panel from the car.

Installation

PERFORMANCE ORDER
Installation is carried out upside-down removals. If any clips were damaged, fix ropes by means of screws.

OVEN FAN

Removal

Models with the conditioner

PERFORMANCE ORDER
1. Remove a casing.
2. Turn off fixing screws and remove the airintaking
branch pipe.
3. Remove a fixing clip and remove the fan.

Models without the conditioner

PERFORMANCE ORDER
1. Remove water taking away panel before a windshield and paper
filter.
2. Remove an airintaking branch pipe with a zaslonka.
3. Disconnect the socket of connection of the fan.
4. Remove a fixing clip and remove the fan.

Installation

Installation is carried out upside-down removals.

RESISTOR OF THE FAN OF THE OVEN

Removal

PERFORMANCE ORDER
1. Disconnect the connection socket.
2. Turn off fixing screws (are specified by shooters).
3. Remove the resistor from the fan.

Installation

Installation is carried out upside-down removals.

OVEN CASING

Removal


PERFORMANCE ORDER
1. Remove the engine of screen wipers of a windshield.
2. Remove the adjustment panel.
3. Remove a glove compartment.
4. Remove the shelf from below an instrument guard.
5. Turn off fixing bolts and remove the central arm.
6. Turn off fixing bolts.
7. Remove the left and right air branch pipes.
8. Remove left and right a knee of air branch pipes.
9. On the Audi A6 models with the diesel engine disconnect connection sockets.
10. Turn off a krpezhny bolt and disconnect a "weight" wire.
11. Weaken collars, press water hoses and disconnect them from a heater.
12. Turn off the fixing screw and remove a fixing strip.
13. Remove an oven from the car.

Installation

Installation is carried out upside-down removals.

HEATER


Removal

PERFORMANCE ORDER
1. Remove an oven.
2. Remove fixing clips (shooters) on the left side of a casing and remove washers.
3. Release fixing clips (shooters) of halves of a casing.
4. Turn off fixing screws (1) halves of a casing and fixing screws of the top plate (2). Some screws are in deepenings.
5. Unbend laying and remove a casing half.
6. Remove a heater.

ADDITIONAL HEATER

The Audi A6 models with the diesel engine

PERFORMANCE ORDER
1. Remove an oven.
2. Remove a heater.

Installation

PERFORMANCE ORDER
Installation is carried out upside-down removals. At installation check, that connection between a heater and a casing was processed by hermetic.