Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
- 13. Electric equipment
   13.1.2. Technical characteristics
   13.1.3. Search of a source of malfunction in electric equipment system
   13.1.4. Safety locks and relay
   13.1.5. Switches
   + 13.1.6. Bulbs
   13.1.7. External lighting devices
   13.1.8. Adjustment of headlights of head light
   13.1.9. Instrument guard
   13.1.10. Elements of an instrument guard
   13.1.11. Lighter
   13.1.12. Horns of a sound signal
   13.1.13. Levers of screen wipers
   13.1.14. Engine of screen wipers of a windshield, connecting mechanism
   13.1.15. The engine of a screen wiper back (Versatile person) flew down
   13.1.16. Elements of system of stekloomyvatel
   13.1.17. Audiosystem
   13.1.18. Loudspeakers
   13.1.19. Radio antenna
   13.1.20. System elements cruise control
   13.1.21. System of the anticreeping alarm system
   13.1.22. Elements of systems of adjustment of forward seats
   13.1.23. System of airbags of safety
   13.1.24. Elements of system of airbags of safety
   + 13.2. Electroschemes
   13.4. Handle of a forward door
   13.5. Handle of a back door
   13.6. Door lock
   13.7. Internal covering of doors
   13.8. Forward window regulator
   13.9. Glass of a forward window
   13.10. Back window regulator
   13.11. Glass of a forward door
   13.12. Window regulator engine
   13.13. Perchatochny boxing
   13.14. Sheeting of the handle of gear shifting
   13.15. Forward ashtray
   13.16. Average console
   13.17. Panel of service of heating
   13.18. Internal covering of the A-rack
   13.19. Internal covering of the S-rack
   13.20. Forward seat
   13.21. Back seat
   + 13.22. Central lock
   13.23. External mirror/glass of a mirror
   13.24. A covering under the dashboard
   13.25. Front bumper
   13.26. Rear bumper
   13.27. Internal wing of the car
   13.28. Car wing
   13.29. Lattice Mercedes radiator/emblem
   13.30. Draft of a cowl of the engine
   13.31. A covering under a windscreen
   13.32. The device of supply of air for salon heating
   13.33. Catchment basin
   13.34. Paint and varnish covering
   13.35. Metal corrosion
   13.36. Automake-up
   13.37. What creaks?
   13.38. Hatch
+ 14. Good advice

13.1.24. Elements of system of airbags of safety

PERFORMANCE ORDER

1. Disconnect a wire of the minus plug of the accumulator.
2. Disconnect wires of a food of system.
	3. On the models which have been let out till July, 1992 the socket of connection of system of airbags of safety (it is specified by an arrow) it is located under the central console.
	4. On the models which have been let out between July, 1992 and June, 1995 the socket of connection of system of airbags of safety (it is specified by an arrow) it is located behind a glove compartment.

MODULE OF THE AIRBAG OF SAFETY OF THE DRIVER

Removal

PERFORMANCE ORDER

	1. Turn off fixing screws.
	2. Remove the module of an airbag of safety and disconnect the connection socket.

Installation

Installation is carried out upside-down removals.

THE MODULE OF THE AIRBAG OF SAFETY OF THE PASSENGER (THE MODELS WHICH HAVE BEEN LET OUT TILL JULY, 1992)

Removal

PERFORMANCE ORDER

1. Remove a glove compartment.

2. Turn off bolts of a fixing arm and lower the module.

3. Disconnect sockets of connection and remove the module.

Installation

Installation is carried out upside-down removals.

THE MODULE OF THE AIRBAG OF SAFETY OF THE PASSENGER (THE MODELS WHICH HAVE BEEN LET OUT AFTER JULY, 1992)

Removal

PERFORMANCE ORDER

1. Remove a glove compartment.

2. Turn off fixing nuts and bolts and remove a support.

3. Disconnect the socket of connection of the module.

4. Turn off a fixing bolt and remove the module of an airbag of safety.

Installation

Installation is carried out upside-down removals.

ELECTRONIC CONTROL UNIT

Removal

PERFORMANCE ORDER

1. Remove the central console.
	2. Turn off fixing (1) nuts, disconnect the socket of connection (2) and remove the electronic control unit.

Installation

Installation is carried out upside-down removals.

CONTACT MODULE

Removal

PERFORMANCE ORDER

1. Remove a steering wheel.
	2. Mark the provision of installation of the contact module and turn off fixing screws (shooters). Remove the module.

Installation

Installation is carried out upside-down removals.

THE ACCUMULATOR AND THE TRANSFORMER OF SYSTEM OF AIRBAGS OF SAFETY (MODEL TILL 1993 OF RELEASE)

Removal

PERFORMANCE ORDER

1. Remove back sitting.

2. Disconnect the connection socket, turn off fixing nuts / bolts and remove the module.

Installation

Installation is carried out upside-down removals.