Audi 100/A6
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Systems of start, ignition
+ 8.1.1. Introduction
+ 8.2. Ignition system (petrol engines)
- 8.3. System of prestarting heating (diesel engines)
8.3.2. Technical characteristics
8.3.3. Heat candles
8.3.5. Diagnostics of malfunctions of system of injection and food
+ 8.4. System of production of exhaust gases
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice
|
Check
| PERFORMANCE ORDER |
| 1. Check tension giving on heat candles. If tension is not present, check the relay and connecting wires. |
| 2. Check resistance of candles and a consumed current. |
|
Removal
| PERFORMANCE ORDER |
| 1. Disconnect a wire from a heat candle. |
|
2. Unscrew a candle from a head of the block of cylinders. |
|
Installation
| PERFORMANCE ORDER |
|
Installation is carried out upside-down removals. Tighten a heat candle till the demanded moment of an inhaling. |
|
|
|
